If your garage floor coating is bubbling, flaking, or peeling up in sheets, it failed at the bond line. Once the bond is gone, no amount of recoating over the top will hold — the entire failed layer must come off down to clean concrete before a new system goes down.
- Diamond grinding for true bond
- Polyurea crack repair
- Moisture testing on every slab
- 15-year written warranty
- Free on-site estimates
- Licensed, insured, locally owned
Common Causes
1. Big-box water-based 'epoxy' kits (Rust-Oleum, Quikrete) installed over an acid-etched slab — bond strength is roughly 1/10 of a professionally ground system 2. Moisture vapor transmission from a slab without a vapor barrier — extremely common in pre-1990 Huntsville homes 3. Hot tire pickup softening a thin coating until it lifts 4. No diamond grind during install — the coating sat on top of laitance instead of bonding to concrete 5. Single-coat application with no primer, no topcoat
Why It Matters
1. Loose chips become slip and trip hazards 2. Exposed concrete absorbs oil and chemicals you can no longer clean 3. Moisture continues to push more coating off the slab every season
Our Professional Solution
We mechanically remove every bit of the failed coating with a diamond grinder and shot blaster — no chemical strippers, no shortcuts.
The slab is moisture-tested. If readings are high we apply a moisture-mitigating epoxy primer rated for 25 lbs MVER.
A new 100%-solids epoxy basecoat goes down, full broadcast of decorative flake or metallic media, and two coats of UV-stable polyaspartic topcoat.
Why Professional Coating Beats Every Alternative
Patching over peeling coating is a guaranteed callback. Our 15-year written warranty starts only after the failed system is completely removed and the new system bonds to bare, profiled concrete.
Frequently Asked Questions
Can you fix this in my Huntsville home or shop?+
Yes. We diagnose every floor on-site, document the failure mode, and provide a written itemized estimate before any work begins.
How long will the repair last?+
Our hybrid epoxy + polyaspartic systems carry a 15-year written warranty. With proper diamond-ground prep and the right chemistry, expected lifespan is 15 to 20+ years.
Will I need to replace the entire slab?+
Almost never. We restore 95% of damaged slabs we evaluate. Replacement is only required for severe structural failure.
How fast can you start?+
Most repairs are scheduled within 1 to 3 weeks. Emergency commercial work can be faster.